Home     Product Details     Product Data Sheet     VSWR Curve     Azimuth Radiation Pattern     Elevation Radiation Pattern  

315, Vishwa Deep Building, District Center, Janak Puri, New Delhi - 110 058, INDIA.
Phone: +91 11 2553 3230, Mob.: +91 98681 28127, Fax: +91 11 2559 8004
Email: info@starantenna.com    Website: www.starantenna.com

SCY-15011 134-174 MHz 11 dBi. Gain

 Click to Enlarge


This rugged, all weather Crossed Elements, Yagi Antenna is designed for Circular Polarization. Special mounting hardware is fixed at the centre of the yagi antenna for mounting on a round pipe of 1-1/2 inch O.D.

The yagi antenna when packed, comes with elements removed from the antenna boom for ease of packing and transportation. It can be assembled at site with use of simple hand tools. The mounting hardware supplied is of Stainless Steel.

Design & Construction:

The yagi antenna uses a GAMMA matching feed, eliminating the use of folded dipole. The antenna termination uses N-Female connector fixed on the antenna dipole.

The 90 degree delay harness cable comes with impedance matched molded joints for low VSWR and require no protection against weather.

When the Antenna is mounted on the mast, the yagi crossed elements make an angle of 45 degrees with respect to horizontal plane.

Polarization Switching:

Yagi antenna can be mounted to work as RCP or LCP selectable by inter-changing the 90 Degrees delay harness cable.

Electrical Data
Frequency Range (MHz.)134-174
Gain (dBi.)11 dBi.
Bandwidth (MHz.)5
PolarizationRCP or LCP (selectable)
Input Impedance (Ohms.)50
Radiation PatternDirectional
Beamwidth 3db (Degrees)51
Front to Back Ratio18
RF Power Handling Capacity (Watts)250
Input TerminationN-Female
Mechanical Data
Mounting HWStainless Steel
Weight (Kgs)5
Wind Rating (KMPH)170
Overall Length (Meters)1.8
Shipping Length (Meters)1.8
Support Boom
- Material
- Cross Section
- O.D. (mm)

- Material
- Cross Section
- O.D. (mm)

Round -Tube
Maximum Mount Pipe Diameter
- mm (Inches)

Please Note:   1. For improvements, specifications are subject to change without notice.
2. The displayed available models are generic with typical specifications.
3. Customized in-band and out of band versions are available on request.